Front / Rear Uni Universal Joint

Replace your universal joint with tools you have at home. Find a u joint at the end of your drive shaft and do a visual inspection to see if it needs replacing.

Keep your u joints in working condition on your Hilux, Landcruiser, or Dyna. Don’t want your drive shaft falling off right? Vibration, rattles, or squeaking can come from failing u joints.

Your drive shaft u joint fits into various Toyota Hilux, Landcruiser, or Dyna vehicles from the 80s to 00s. Check the image for the exact make and models. Get your mechanic to install it if you are not confident.

If you got the tools, replace the cardan joint yourself and save money. Start by getting under your Toyota and remove the bolts holding the drive shaft in place. Hopefully you know the rest.

Top off the greaseable u-joint after you have installed it. Fill it with your grease gun till the grease pours out. Wipe it off the excess then you are good to drive. Always do a test drive to make sure everything is installed correctly.

Key Features

• Universal joint for Toyota Hilux, Landcruiser, and Dyna vehicles


• Original parts standard


• Built-in grease channels


• Precision forged and built to last


• High rotation speed and low noise


• Wear, corrosion, and high temperature resistant

Material: Chrome steel

Cap Type: Groove

Inside Yoke: 52 mm

Cap Diameter: 29 mm

Diameter: 80mm x 80mm x 29mm (L x W x H)

Colour: Silver

• 1 x Front Universal Joint


• 1 x Rear Universal Joint


• 4 x Snap Clips


• 1 x Grease Nipple